×

There are no items in your shopping cart.

Menu

Solid Oak Kitchen Cabinet Specification

The quality of our solid oak kitchen cabinets simply cannot be denied; as such, we're happy for website visitors to 'explore' the cabinet from every angle! To discover the impeccable quality on offer, simply view one of our solid oak base cabinets in its entirety by using the 360° image above.

Our full cabinet specification is listed below:

18mm solid European oak panels (40mm staves) for carcass sides, shelves, top and base: all of which are finger jointed & high pressure glued using the most technologically advanced German CNC machinery.

All cabinets are manufactured, lacquered & finished in the UK.

Innovative lacquer finish formulated to provide outstanding resistance to abrasion, wet and dry heat, spirit solutions and a wide range of household chemicals.

Surface finish is stain resistant to household food & drink (including red wine).

Cabinet finish approved to FIRA standard 6250:2005.

Oak panels are supplied fully finished and sanded to 150 grit, with factory furniture 3mm neat edge profile before finishing.

3.5mm oak design foil covered medium density fibreboard (MDF) back panels to allow for natural contraction / expansion.

Convenient 75mm service gap with all standard base cabinets and full height cabinets (wall cabinets and 300mm depth slimline base cabinets have a service gap of 10mm). For 450mm depth slimline base cabinets, a service gap of 40mm is provided, whereas curved and open end units are supplied without a service gap.

The specified height of base units excludes the height of the adjustable leg (150mm as standard, adjustable from 135mm / 175mm).

Each cabinet is supplied with a single solid oak shelf; however, additional solid wood shelves can be purchased separately if required. Each standard base cabinet is supplied pre-drilled with slots to accommodate up to five shelves.

Supplied fully-assembled as standard.

Easy assembly (15 - 60 minutes per cabinet).

Assembly Instructional booklet provided with each cabinet, and downloadable instructions available online.

Pre-drilling service available.

Clean with a damp cloth and warm soapy water.

150mm / 600mm units supplied with four adjustable legs (including plinth clips), 800mm / 1200mm units supplied with five adjustable legs (including plinth clips).

Rails provided to support side panel of cabinet (if necessary).

Zinc plated cabinet hanging brackets supplied with wall units (including hangers).

Please note that the actual width of all solid oak cabinets is subject to a +/-2mm tolerance.

Last updated December 2014